As fascinating it is to enjoy wireless music streaming with AirPods, as irritating it gets when the AirPods keep cutting out. Even after trying several times, no solution seems to work. You are here at the right place if you are also looking for how to fix AirPods that keep cutting out?
In this article, we have summed up seven solutions for how to fix AirPods keep cutting out. So, stay with us till the last to check out the solutions.
- 1 Examine Bluetooth Connection
- 1.1 Here are steps that will help you keep your AirPods connected with the device.
- 1.2 Reset your AirPods
- 1.3 Sign out of the Apple iCloud
- 1.4 Clean your AirPods
- 1.5 Here are some tips by experts that will help you
- 1.6 Check the Battery Percentage
- 1.7 Deactivate Automatic Switching
- 1.8 Forget and Repair the AirPods
- 1.9 Few More Tidbits
- 1.10 Update Your iPhone
- 1.11 Reset Network Settings
- 1.12 Reset Bluetooth Settings
- 1.13 Reboot your phone
- 1.14 Change earbud position
- 1.15 Use AppleCare+
- 1.16 FAQs
- 2 Why are my AirPods glitching?
- 3 Why do my AirPods cut out for a second?
- 4 Why do my AirPods keep cutting out when my phone is in my pocket?
- 5 Why do my AirPods keep disconnecting when fully charged?
Examine Bluetooth Connection
Before modifying the settings or updating any software, ensure that the Bluetooth connection is active. Bluetooth connection disconnects by design after minutes of inactivity. What you need to do is- ensure the Bluetooth connection is active.
Moreover, keep your AirPods closer to your iPhone. The maximum coverage a standard Bluetooth connection offers is 30ft. Exceeding the range will drop the signals and eventually cut out.
Here are steps that will help you keep your AirPods connected with the device.
- Restart your iPhone and navigate to the settings.
- Under the connectivity menu, select the Bluetooth option.
- Check whether the connection is on or off.
- Turn off the Bluetooth connection, then turn it on again. To do so, tap on the green toggle of the Bluetooth option. It will turn grey. Now, again tap on the same toggle to activate the Bluetooth mode.
- Also, make sure your AirPods are in an active mode for better connection.
Reset your AirPods
Sometimes, a small malfunction in the AirPods can be the cause of frequent disconnection- little did you know. Whenever it comes to fixing any electronic device, the first thing that comes to mind is- let’s give it a restart.
Why not do the same here? To get things done, what you need to do is;
- Put the AirPods back in the case and close the lid.
- After 15-20 seconds, press-hold the setup button.
- By doing so, the indicator will flash white light.
- At this point, your AirPods should have reset.
- To make an active Bluetooth connection, hold AirPods close to the iPhone.
Sign out of the Apple iCloud
This fixing way must sound weird to you but have potent to fixing the error. At some points, electronic gadgets are unpredictable. We never know with which software or device they show disconnection or malfunctions.
Apple iCloud is used to secure your data on the cloud across all devices. Yet, you can use your iPhone without iCloud. Some users prefer saving their data locally as excessive data on the cloud sometimes causes an error in connections and streaming.
To fix this issue,
- Navigate to the iPhone and enter your Apple ID.
- From the drop-down menu, click on the log-out option.
- Now enter your Apple ID (email and password).
- Counter-check that the input data is correct and click on sign out.
- So far, you are logged out of the Apple iCloud.
- Now restart your phone and sign in again.
Clean your AirPods
Do you remember the last time you cleaned the AirPods? Last month or maybe more. The dust and debris clogging the pin can cause the signals to pass from AirPods to the iPhone. As a result, your AirPods keep disconnecting.
First, be careful while cleaning the case and AirPods. Use a microfiber or lint-free fabric to do so. Instead of using water, use a cleaning solution.
Another reason why cleaning the AirPods is necessary is the poor charging. No matter how many hours you keep trying charging the AirPods, the clog pins won’t let the signals pass through.
Here are some tips by experts that will help you
- Don’t let even a single drop of liquid get into the case or AirPods.
- Gently rub the outside of the case and AirPods with lint-free fabric.
- Ensure the AirPods are dry before putting them back in the case.
- Hold the AirPods upside-down while cleaning them. If not, the liquid will flow inside the headband.
- Consider removing the cushion while cleaning the AirPods.
- Prevent using any intense material while cleaning the AirPods.
Check the Battery Percentage
Just the way you need food as fuel for your body and keep yourself active, the same applies to AirPods. Continuous use swiftly decreases the battery percentage, which has a direct impact on the audio quality and connection.
Track the battery percentage of the AirPods by keeping them close to the iPhone. The battery status will display on your phone.
Another way to check the battery percentage is by using the battery widget. Scroll down the menu and click on edit to add the battery widget option. It will help you track the AirPods’ battery percentage from the homepage.
Deactivate Automatic Switching
Ever notice your AirPods keep connecting and disconnecting, again and again? That is all because of the Automatic switching feature. This feature lets the AirPods alternate between different iOS 14 devices.
The major drawback of this feature is it lets the AirPods connect with unwanted devices. To fix this,
- Navigate to the settings of your iPhone and direct to the Connectivity option.
- From the drop-down Bluetooth menu, select your desired AirPods.
- Click on the “I” button beside the specific device.
- Lastly, mark the When Last Connected to this iPhone option to disable automatic switching.
Forget and Repair the AirPods
Here comes the last solution. If nothing works for you, try forgetting and then reconnecting the AirPods.
- Go to the settings and direct to the Bluetooth menu.
- Select the connected AirPods, and forget the connection.
- Try repairing the devices again, then check the connection.
Few More Tidbits
AirPods are the first wireless earbuds from Apple that everyone has been raving about lately. However, some people may notice that they keep cutting out, which can be quite annoying when you’re in the middle of an important call or listening to your favorite song.
Update Your iPhone
The most common cause of AirPod cutouts is a misconfiguration of your Bluetooth settings on your iPhone. Tap Settings > Bluetooth, then make sure that there’s a checkmark next to Allow Audio Devices to Play Through iPhone. If there isn’t, tap it so that it appears. Once you have that enabled, relaunch your music app of choice and try playing music through your AirPods again; they should work properly. If not, proceed to step two. If you can’t connect with any device: Make sure that both of your AirPods are charged at at least 50 percent. To do so, hold down either one until they start blinking rapidly. Then press each button five times in quick succession—you should see white flashes as each button press registers—and place them back in their case for at least 15 minutes before trying again. If nothing happens after charging them up, remove one from its case and force restart it by holding down its center button for about 15 seconds. Put it back in its case (which will recharge it) and repeat with the other pod if necessary; doing so has fixed connection issues for me several times now.
Reset Network Settings
If you’re having trouble staying connected with your iPhone or other Apple device, resetting network settings may be just what you need. When you reset network settings, iOS deletes all data about known Wi-Fi networks and then automatically reconnects to known networks.
Here are how: From your Home screen, swipe up from the bottom of your screen and tap Settings > General > Reset. Then tap Reset Network Settings. Enter your passcode if prompted. Your device will turn off and back on again as it resets network settings. Afterward, go to Settings > Wi-Fi and connect to a known network to verify that it is working properly again.
You can also try resetting your network settings by going to Settings > General > Reset and tapping Reset Network Settings. Then follow these steps: Turn off your device by pressing and holding both the Sleep/Wake button (on top) and the Home button (at the bottom). Press and hold both buttons until you see an Apple logo. Note: You might have to wait more than 5 seconds for the Apple logo to keep holding it until you see it! When you see Welcome to iPhone, release both buttons at the same time.
Reset Bluetooth Settings
If your AirPods keep cutting out, you may want to reset your Bluetooth settings. To do so: Go to Settings > Bluetooth and turn off all of your connected devices. Then, go back into Settings > Bluetooth and turn on each device individually. This will ensure that you have no ghost devices connected and might help with any connection issues you’re having.
You can also try restarting your iPhone or iPad by holding down both Sleep/Wake and Home buttons for at least ten seconds until you see a slide to power off appear on-screen. Let go of both buttons, then press and hold Sleep/Wake until you see slide to power off again. Once you let go, press and hold Home until your iPhone restarts itself. Finally, check for updates by going to Settings > General > Software Update if there is an update available for iOS 11 or higher versions that could be causing some problems with connectivity between your AirPods and other Apple devices.
Reboot your phone
If your AirPods keep cutting out, rebooting your phone might help. To do so, double-tap the Home button and swipe up on each of your apps until you find Settings. Tap on it, then swipe up and hold until a message appears asking if you want to shut down your phone. Tap OK. Once it’s turned off, turn it back on by pressing and holding down both sides of your Home button at once. This will bring you to your lock screen.
Swipe right to open Control Center, tap on Bluetooth, toggle it off, and then back on again. This may take a few tries before it works properly. If that doesn’t work, try removing one or both earbuds from their case for 10 seconds before putting them back in again. When you put them back in, make sure they snap into place securely. Finally, you can also reset your AirPods: Open up Apple’s charging case and remove one of your earbuds. Press and hold its pairing button for 15 seconds, which is located on its bottom edge next to a tiny hole. Then put it back into its charging case with another short press of its pairing button. Repeat these steps with your second AirPod and put both backs into their charging case when finished. Your AirPods should now be reset!
Change earbud position
If you’re experiencing an issue with your AirPods cutting out, try adjusting where they are positioned in your ears. Make sure you give each bud a consistent amount of pressure when inserting them into your ear canal. Don’t try and jam them in! The proper way is to gently push until you feel that it has made contact with your ear. You should not be able to see any part of it outside of your ear. Also, make sure that they aren’t sticking out too far from your ears. They should sit comfortably inside without feeling like they might fall out at any moment. If you find yourself having trouble getting a good fit or if one side keeps falling out, consider switching sides or trying different size tips. There are three sizes available: small, medium, and large. If all else fails, consider contacting Apple Support for further assistance.
The Apple AirPods come with a charging case that holds multiple charges for your headphones so you don’t have to worry about running out of battery life before you can get back home to charge them up again. But if your case isn’t holding its charge anymore, then there’s no reason why it won’t work properly for your headphones either.
AppleCare+ for iPhone extends your repair coverage and telephone technical support to two years from your AppleCare+ purchase date. Repair coverage includes all batteries, exterior glass, memory and logic boards. Telephone technical support is available from a specialized team of experts who can answer questions about iOS, macOS, and iCloud. And you get global repair coverage—whether you’re in Malaysia or Minnesota, there’s an Apple Authorized Service Provider nearby. Finally, if your iPhone has accidental damage that isn’t covered by AppleCare+, you can use one of your included benefits to getting it fixed for a small fee.
You might also want to try turning off LTE: Settings > Cellular > Enable LTE > Off
Or perhaps resetting them? You’ll find a how-to on that elsewhere online but essentially: Hold down both volume buttons and both side buttons until they turn off completely (or until their white light goes off). Then hold down only one side button until they turn back on again. Repeat with another side button after they’ve turned back on again.
See? We got you covered with how to fix AirPods that keep cutting out? Despite how common this issue is, fixing it is not as complicated as you may think. What you need to do is- find the error-causing agent and get it fixed instantly. Lastly, comment down below on which solution works the best for you.
Why are my AirPods glitching?
If you’re using an iPhone and having issues with your AirPods, it could be a connectivity issue. Go to Settings > Bluetooth and make sure that connect is turned on for your headphones. Apple also recommends connecting to known Wi-Fi networks instead of unknown ones. Also, if you’re experiencing lag between tracks or skipping music, try deleting and re-pairing your headphones with your device via Settings > Bluetooth.
Why do my AirPods cut out for a second?
It turns out there are two main reasons why your AirPods might cut out. The first is because of what you’re doing when it happens—and while it might not be ideal, it’s also very easy to fix. Let’s start there:
The first reason your AirPods keep cutting out is that you’re moving around too much. If you’re running or dancing or just generally moving around too much, then your headphones will keep cutting in and out as they try to find a signal from your phone.
Why do my AirPods keep cutting out when my phone is in my pocket?
The first thing you can do is ensure that your case is not compromised in any way. You should check for any cracks or gaps around your AirPod case, and make sure that it is firmly attached to your iPhone 7/7 Plus. If there are no issues with your case, then check if you are running out of battery power on either device. Your AirPods will cut out if they have very little charge left, so make sure they have enough juice before using them again.
Why do my AirPods keep disconnecting when fully charged?
Apple claims that a 15-minute charge will give your AirPods enough juice for 3 hours of listening. But some users have found that their AirPods are disconnecting without warning well before those three hours are up. This issue which is frustrating at best and devastating at worst can be chalked up to a few different things. Here’s how to fix your disconnected Apple AirPod problem (and stop losing your place in podcasts, movies, and videos).